Awlgrip High Build Primer

Call toll free - (877) 379-2248

High Build Epoxy Primer

A two component epoxy primer for use where high build and filling is required. Not to be used below the waterline.

Best when used as a surfacer over other Awlgrip Primers and fairing compounds. May be applied directly to properly prepared wood or fiberglass; however, best results are obtained when these surfaces are first sealed with 545 Primer. See Surface Preparation section for each type of substrate.

Part No.

Description (Click to view & order)

Price

awlD8002GL

awlD3002QT

awlD3002GL

awlT0031QT

awlT0031GL

awlT0006QT

awlT0006GL

Mixing and Reduction

Mix by volume one part Base with one part D3002 to a smooth homogenous mixture. Reduce 10-20% with T0006.
Example: 8 oz. Base : 8 oz. D3002 : 3.2 oz. T0006
Induction Time after Mixing: 15 Minutes
Anticipated Pot Life at 77F/50% R.H: 8 Hours

Application Instructions

Spray: Apply High Build Epoxy Primer in even coats of 8 to 10 mils (200 to 250 microns) wet film thickness yielding 4 to 5 mils (100 to 125 microns) DFT. Two to three coats may be required.

Do not apply paint materials to surfaces warmer than 105F or colder than 55F. Do not attempt to cure products at temperatures below 55F.

Pyacht.com
Performance Yacht Systems
919 Bay Ridge Road
Annapolis, MD 21403

Toll free: 1-877-379-2248
Local: (410) 267-8681

Join our Email List
Enter your email address in the box below and click submit to receive bi-weekly product updates and special offers.