|
|
VW Series
The VW Series of anchor winches is
designed for traditional rope and chain combination anchor rodes, where
transference of the rode from the rope warping drum to the chain wheel is
required.
Standard Equipment: Single
Direction Controls, 12 Volt, 1 Covered Footswitch, 1 Breaker Panel
(On/Off), Chainwheel, Emergency Handle
|
|
Part No. |
Description
(Click to view & order) |
Price |
Features
- Vertical design suits smaller powerboats or
sailboats and can be utilized for anchor rodes, as docking
capstans on larger craft, or auxiliary line hauling use.
- Rope hauling from any direction.
- High-quality finish on above deck components.
- Cone-type brake/clutch mechanism permits
manual, "free-fall" anchoring. Cone clutches,
unlike dog clutches, provide smooth progressive engagement
ensuring safe and precise operator control.
- Chain wheel locking pawl (except 500 and 800
series).
- Simplified through deck installation by
modular design and precise alignment of gearbox to the top works
utilizing marine-grade stainless steel studs.
- The gearbox has a high efficiency output
drive with heavy duty wide face, precision, bronze spur gears in a
sealed oil bath. (Specifications differ depending on prime mover
and winch rating).
- Marine grade alloy gearbox housing, finished
with a two coat paint system.
- Oil level sight glass/drain plug for
inspection and gearbox oil change.
- Heavy duty, dual direction motor, designed
for marine winches. Isolated ground type, with durable
class F insulation. Easily removed for servicing.
|
Standard Equipment
- Circuit breaker/isolator panel (Except on hydraulic
unit)
- Footswitch
- Chain Wheel
- Emergency crank handle/clutch control lever (except on
VW500)
Options
- Additional footswitches
- Dual direction solenoid pack
- Remote controls
- Hydraulic motor (except on VW 500)
- Traditional bronze finish
- Chainstopper - (Important: Maxwell
windlasses should be used in conjunction with a chain stopper to
take the load off the windlass while laying at anchor.
Utilize the chain stopper or alternative snubbing system to hold
the anchor in the full raised position while underway.
- Chainpipe
- Extra deck clearance kit
- Larger vertical windlass version available
(Refer to Maxwell Superyacht)
|
Specifications
| Feature |
500 |
800 |
1200 |
2200 |
3500 |
| Maximum Pull |
500 lbs.
227 kg. |
800 lbs.
364 kg. |
1200 lbs.
545 kg. |
2200 lbs.
1000 kg. |
3500 lbs.
1590 kg. |
| Line Speed |
60 ft./min.
18m/min. |
60 ft./min.
18m/min. |
56 ft./min.
17m/min. |
56 ft./min.
17m/min. |
33 ft./min.
10m/min. |
| Power Supply (DC) |
12 or 24V |
12 or 24V |
12 or 24V |
12 or 24V |
12 or 24V |
| Motor (Watts) |
600w |
1000w |
1200w |
1200w |
1200w |
| Hydraulic Pressure |
N/A |
1450 PSI
100 BAR |
2000 PSI
138 BAR |
1800 PSI
124 BAR |
2000 PSI
138 BAR |
| Hydraulic Flow |
N/A |
5.3 US gal.
20L/min. |
5.3 US gal.
20L/min. |
9.5 US gal.
36L/min. |
8.5 US gal.
32L/min. |
| Max. Chain Size (Short Link) |
1/4"
6mm |
5/16"
8mm |
3/8"
10mm |
7/16"
11mm |
1/2"
13mm |
| Net Weight - DC |
22 lbs.
10 kg. |
41 lbs.
19 kg. |
50 lbs.
22 kg. |
81 lbs.
37 kg. |
105 lbs.
48 kg. |
| Net Weight - Hyd |
N/A |
28 lbs.
13 kg. |
34 lbs.
15 kg. |
68 lbs.
31 kg. |
88 lbs.
40 kg. |
Dimensions (please refer
to diagram below)
| Measurement |
500 |
800 |
1200 |
2200 |
3500 |
| A |
2 9/16"
65mm |
3"
76mm |
3 5/32"
80mm |
3 11/16"
94mm |
4 5/16"
110mm |
| B |
5 11/16"
144mm |
6 17/32"
166mm |
8 5/32"
207mm |
9 17/32"
242mm |
10 7/8"
274mm |
| C |
1 3/8"
35mm |
1 21/32"
42mm |
2 23/32"
69mm |
3 5/32"
80mm |
3 9/32"
83mm |
| D |
7 3/32"
180mm |
8 21/32"
220mm |
8 21/32"
220mm |
11 13/32"
290mm |
11 13/32"
290mm |
| E |
9 19/32"
244mm |
10 9/16"
268mm |
10 29/32"
277mm |
7 9/32"
185mm |
7 9/32"
185mm |
| F |
4 15/16"
125mm |
6 5/16"
160mm |
6 1/2"
165mm |
7 1/2"
190mm |
10 5/8"
270mm |
| G (Std deck clearance) |
2 1/4"*
57mm |
4"
100mm |
4"
100mm |
4"
100mm |
4"
100mm |
| H (Working height of drum for
rope warping) |
1 15/32"
37.5mm |
1 11/32"
34mm |
1 3/4"
44mm |
1 5/16"
33mm |
2 5/32"
55mm |
| I |
4 15/16"
125mm |
6 7/16"
164mm |
6 5/8"
169mm |
7 5/8"
194mm |
10 5/8"
270mm |
* USA 4" (100mm) standard
Extra deck clearance kit available up to: +50mm (+2") Except VW2200/3500:
+100mm(4")
|
