|

-
Download Data Sheet -
|

NG-1 NMEA 2000 Gateway
The Actisense NMEA 2000
Gateway is an easy way to link between your boat's data networks. The
NGW-1 makes it possible to convert NMEA 0183 data into NMEA 2000 data and
vice-versa.
Using the advanced configuration software it is simple to set up which
data items you want translated between the two buses.
The NGW-1 allows you to keep your current NMEA 0183 equipment, or to
incorporate the latest NMEA 2000 equipment into your current NMEA 0183
system. It also allows a single cable NMEA 2000 bus system to be
installed, allowing data from any node on the bus to talk to any other,
including those NMEA 0183 instruments connected using our gateway. In this
mode, the NMEA 2000 network acts like a bi-directional multiplexer,
allowing all data sources to talk to each other.
The very latest Actisense ISO-Drive technology has been used in the NGW-1
to separate the output from ground. Electrical spike protection is
provided as standard on the NGW-1's input using full galvanic Opto-isolation
to provide superior protection to the NMEA source device. Thus full
isolation is maintained between the NMEA 0183 input and output and the
NMEA 2000 CAN bus.
Simple to use, the NGW-1 is provided with all required cabling, and also
incorporates screw terminal connectors within the case to allow customer
specific wiring to be done.
|