Awlgrip Awl Fair

Call toll free - (877) 379-2248

Awlfair Fairing Compound

Awl-Fair Fairing Compound

Awlfair L.W is a premium trowelable product for fairing, leveling or smoothing surface imperfections due to gouges, pitting, dents or weld seams. The Awlfair LW formulation brings you the latest technology with super smooth finish and easy sanding. Awlfair LW is suitable for both manual and automatic mixing. Leading industry applicators rave about it’s application attributes. Backed by extensive laboratory research and development, Awlfair LW has been tested and approved for a multitude of systems. May be used above or below the waterline.

Part No.

Description (Click to view & order)

Price

awlD8200GL

awlD7200GL

Specification Data

Type: Two-component epoxy.

Color: White base, red converter. Pink - after mixing components

Packaging: Available in 1 Quart, 1 Gallon (US only) ,2 Gallon pails, 60LT pails (EU only) and 200lt containers (EU only).

Theoretical Coverage - Sq. Feet/Gallon; 6.8 Sq. Feet (0.63 m^{2) at
240 mils (6000 microns) DFT.}

Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment.

Recommended Wet Film Thickness: 240 mils (6000 microns) per coat . Maximum 400 mils (1 cm).

Number of coats: As required

Anticipated Cure Time at 75º F/25°C/50% R.H: 8 hours touch dry; 24 hours resistance to foot/tread; 7 days full cure.

Recoatability: AWLFAIR L.W. must be sanded before recoating with itself or any other primer. It must be over coated with an epoxy primer such as HIGH BUILD, EPOXY SPRAYABLE FAIRING COMPOUND, HULLGARD, ULTRA BUILD or STD E Trowelable Filler (Europe only) before applying the finishing system.

AWLFAIR LW is sandable after 48 hrs at 55 º F /13°C , 17hrs at 77º F/25°C & 6.5 hrs at 95°F/ 35°C.

Shore D hardness development after 7 days: >60 at 77 º F/25°C.

VOC: Base (D8200) - 0 g/l or 0 lbs/gal

Converter (D7200) - 84 g/l or 0.70 lbs/gal

Mixed (1:1 by volume) - 42g/l or 0.35 lbs/gal

Product Components, Reducers, Additives, and Auxiliary Components

Base - AWLFAIR L.W. BASE WHITE............................................................................................................D8200

Converter – AWLFAIR L.W. CONV RED........................................................................................................D7200

Equipment Cleaning...................................................................................................... T0006 or T0002 or M.E.K.

Application Equipment

Longboard battens, trowels, Spatulas or Putty Knives.

Surface Preparation

Only apply over properly applied and prepared Awlgrip primers. Hullgard Extra Epoxy Primer (EU only), Hullgard Epoxy Primer and

High Build are recommended substrate primers.

Awlfair LW may be applied direct to Hullgard Extra or Hullgard Epoxy Primer without the need for sanding. See the relevant primer product datasheet for details. High Build must be sanded prior to application of Awlfair LW.

Pyacht.com
Performance Yacht Systems
919 Bay Ridge Road
Annapolis, MD 21403

Toll free: 1-877-379-2248
Local: (410) 267-8681


	Join Email List