|
Call toll free - (877) 379-2248 |
|
|
|
|
|
|
H3000 Autopilots must be connected to an H2000 or H3000 instrument system. Base Pack, Drive System, Compass & Rudder Feedback Required for Complete System |
The H3000 Pilot fully integrates with the H3000 instrument system, both in terms of style and performance. The instrument system transmits sensor information via the B&G Fastnet network to the ACP Pilot computer unit. The Pilot computer processes the sensor data and then sends signals to the rudder drive system (linear ram, rotary drive or hydraulic pump) to steer the vessel on the desired course. The complex learning algorithms used in the Pilot computer ensure that the steering performance is optimized for the sea and weather conditions, and quickly responds to any changes that may occur. Control of the Pilot is via the keys on any one of the dedicated Graphical Pilot Displays (GPD). Each display acts as a master allowing control of the Pilot from any station. H3000 Pilots are available with a wide range of powerful and reliable 12V or 24V dc rudder drive units suitable for boats of over 7m (23ft). The ACP (Advanced Control Program) Pilot computers are supplied in two specifications ACP1 or ACP2 (Advanced Control Programming) depending on the size of vessel, power requirements and options in use. The H3000 Pilot can be used for both sailing and power boats that have a H3000 System installed. |
|||||||||||||||
|
H3000 Packages
Autopilot Drives
Rudder Feedback Options
Compass
Accessories & Spares
|
||||||||||||||||
 |
|||||
|
Pyacht.com Toll free: 1-877-379-2248 |
|
|
|||
|
Home
| Manufacturer Index
| Advanced Search | Show
Cart | Checkout |
|||||
Copyright©1997-2010 - pyacht.com
