|
|
Viny-Lux Primewash
Viny-Lux® Primewash is a
two-part zinc chromate, vinyl butyral self etch primer, that is used as a
metal conditioner for adhesion prior to application of other paints on
metal.This product is best applied by spray, but can be applied by brush.
Do not apply more than one coat. |
|
Part No. |
Description
(Click to view & order) |
Price |
| Colour |
Y353-Translucent
Yellow |
| Finish |
Matte |
| Specific
Gravity |
0.91 |
| Volume
Solids |
8% |
| Mix
Ratio |
7:1
by volume (as supplied) , Converter/Curing Agent - Y354 |
| Typical
Shelf Life |
2
yrs |
| VOC
(As Supplied) |
780
g/lt |
| Unit
Size |
1
US Quart 1 US Gallon |
|
| DRYING/OVERCOATING
INFORMATION |
|
|
Drying |
|
50ºF |
59ºF |
73ºF |
95ºF |
|
|
| Touch
Dry [ISO] |
30mins |
30mins |
30mins |
30mins |
| Pot
Life |
8hrs |
8hrs |
8hrs |
8hrs |
|
|
Overcoating |
|
Substrate
Temperature |
|
50ºF |
59ºF |
73ºF |
95ºF |
| Overcoated
By |
Min |
Max |
Min |
Max |
Min |
Max |
Min |
Max |
|
|
| Epoxy
Barrier-Kote |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
| Epoxy
Primekote |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
| Interprotect
2000E |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
| Interprotect
3000/3001 |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
| Primocon |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
| VC
Performance Epoxy |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
| VC
Tar2 |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
1hrs |
24hrs |
|
| Preparation |
Sandblast
or grind to bright metal finish. Remove all blasting/grinding/sanding
residues with a clean air line and sweep with a clean brush or broom.
(Vacuum clean for best results.) Immediately apply Viny-Lux Primewash
353/354 thinned 25% with Viny-Lux Solvent 355. |
|
|
| Method |
Viny-Lux
Primewash 353/354 is best applied by spray, but can be applied by brush.
Apply one coat only. |
|
|
| Hints |
Mixing Mix
both components together thoroughly to correct mix ratio. Stir well
before use. If small amounts are required, the mixing ratio by volume is
7 parts Viny-Lux Primewash Base 353 to 1 part Viny-Lux Primewash Reducer
354 to 2 parts Viny-Lux Solvent 355. Mix only as much as you can use in
the stated pot life.
Thinner Viny-Lux® Solvent 355
Thinning Thin Viny-Lux Primewash 353/354 25-30% with
Viny-Lux Solvent 355.
Conventional Spray Pressure Pot: Pressure: 3.44-4.47
bar/50-65 psi (gun pressure); 8-10 psi (pot pressure). Tip Size:
0.89-1.4 mm/35-50 thou. Siphon Cup: Pressure: 3.44-4.47 bar/50-65 psi -
gun pressure. Tip Size: 1.0-1.4 mm/40-50 thou.
Other Viny-Lux Primewash 353/354 must be overcoated within
24 hours of application. If more than 24 hours has elapsed, sand it off
and reapply another coat. |
|
|
| Some
Important Points |
Do
not apply more than one coat. Do not apply in excess of 0.5 mils DFT.
Excess film thickness will lead to delamination and splitting. Be
careful not to leave puddles in deep sanding tracks. Do not use a cloth
to remove blast residue as the cloth may leave fibers behind which can
cause wicking of moisture through the primer system and cause premature
failure. Product temperature should be minimum 10°C/50°F and maximum
29°C/85°F. Ambient temperature should be minimum 10°C/50°F and
maximum 35°C/95°F. Substrate temperature should be minimum 10°C/50°F
and maximum 29°C/85°F. |
|
|
| Compatibility/Substrates |
Apply
over bare metal only. Metal surface must be thoroughly dry and free of
all rust, mill-scale, grease, oil and paint. Sandblasting, power wire
brushing and grinding with medium grade (grit) emery cloth are the best
methods of cleaning. Do not use coarse sandpaper or grinding wheels. |
|
|
| Number
of Coats |
1
only |
|
|
| Coverage |
(Theoretical)
- 425 (ft²/Gal) by brush, 340 (ft²/Gal) by spray |
|
|
| Recommended
DFT |
0.3
mils dry
|
| Recommended
WFT |
4.0
mils wet |
|
|
| Application
Methods |
Brush,
Conventional Spray - Pressure Pot or Siphon Cup |
|
| TRANSPORTATION,STORAGE
AND SAFETY INFORMATION |
| Storage |
TRANSPORTATION:
Viny-Lux Primewash should be kept in securely closed containers during
transport and storage.
STORAGE:
Exposure to air and extremes of temperature should be avoided. For the
full shelf life of Viny-Lux Primewash to be realised ensure that between
use the container is firmly closed and the temperature is between 5°C/40°F
and 35°C/95°F. Keep out of direct sunlight.
|
|
|
| Safety |
DISPOSAL:
Do not discard tins or pour paint into water courses, use the facilities
provided. It is best to allow paints to harden before disposal.
Remainders of Viny-Lux Primewash cannot be disposed of through the
municipal waste route or dumped without permit. Disposal of remainders
must be arranged for in consultation with the authorities.
GENERAL: Read the label safety section for Health and Safety
Information, also available from our Technical Help Line.
Viny-Lux Primewash Reducer 354 contains Phosphoric Acid and must be
handled with care. |
|
| IMPORTANT
NOTES |
The
performance of any marine paint or coating depends on many factors
outside the control of International Paint Inc., including surface
preparation, proper application, and environmental conditions.
Therefore, International Paint Inc. cannot guarantee this product's
suitability for your particular purpose or application. IMPLIED
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND/OR MERCHANTABILITY
ARE EXCEEDED. International Paint Inc. SHALL NOT, UNDER ANY
CIRCUMSTANCES, BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. By
purchase of this product, the buyer agrees that the sole exclusive
remedy, if any, is limited to the refund of the purchase price or
replacement of the product at International Paint Inc. option. |
|
Join Email List
