Spartite

Call toll free - (877) 379-2248

Register | Login

Spartite Mast Chock System

Spartite 2000 comes in two kit sizes:

Kit I = 51 cu. in. = 836 cu. cm

Kit II = 102 cu. in.= 1672 cu. cm

Spartite

Spartite™ is the modern answer to the ancient problem of mast support and sealing at the partners. Spartite is a pre-measured two part polymer poured into the cavity between the mast and the partners while the mast is in the boat.

Each kit comes with complete instructions to build a simple mold out of even the most complex partners or mast collar. Spartite makes a one piece perfect fitting mast chock that replaces archaic wedges.

Part No.

Description (Click to view & order)

Price

spa20001		$
spa20002		$

To estimate the quantity of SPARTITE needed, measure the square inch, or square centimeter, area of the mast section and subtract that number from the square inch, or square centimeter, area of the partner opening. Multiply this number by the desired depth, which must be at least 2". If you purchase too little, a further amount can always be mixed and added later.

Technical Specifications	Spartite 2000
Mix Ratio by weight or volume	100/25
Mixed viscosity @ 25°C, cps	2,500
Pot Life @ 25°C	8-14 min
Cure @ 25°C (days before sailing)	3 days
Color	Midnight Blue
Shore Hardness	55-60 D
Tensile Strength PSI	4,000
Ultimate elongation %	200
Tear Strength (Graves), PLI	600
Compressive modules PSI	55,000
Linear Shrinkage over 1 inch	.001
Izod Impact, notched, ft. lbs./in.	9.5

Pyacht.com
Performance Yacht Systems
919 Bay Ridge Road
Annapolis, MD 21403

Toll free: 1-877-379-2248
Local: (410) 267-8681


	Join Email List

Home | Manufacturer Index | Advanced Search | Show Cart | Checkout
Anchoring/Docking | Clothing | Communications | Electrical | Electronics | Engine/Props | Interior/Galley | Maintenance | Navigation | Plumbing/Pumps | Rigging | Safety | Sailing Hardware
About Us | Contact Us | Delivery | Order Tracking | Privacy | Returns | Terms of Sale

Copyright©1997-2012 - pyacht.com