mechanical steering is still the choice for
stern drives, inboards and other power assisted applications. It’s
just right for power steered boats in which No FeedBack™ systems are not
required. Our new Rack features the precision and comfort of four turns
lock-to-lock In single cable configurations, this is the best 4-turn
choice for power-steered boats.
Virtually all power-assisted stern drive boats with wheels up to 16”
diameter. Back Mount Rack Replaces 1984-date Teleflex “The Rack”
steering without dash modification. (Requires use of SSC134 Back Mount
Rack cable.) For single station use only. Components are available for
twin cable systems, but we recommend No-FeedBack steering for all
twin cable steered outboards.
See NFB Pro Rack & SeaStar PRO sections.
Precise, easy 4 turns lock-to-lock.
Kits include: cable, helm, bezel and hardware.
Standard 3/4” tapered steering shaft.
Stainless steel cable output ends.
Fast, easy installation: back mount design allows quick placement in dash PLUS
mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
(Click to view & order)
How to Measure Cable:
For a New Installation:
Measure Cable Routing Path in Boat as follows:
A = Center line of wheel to gunwale,
B = Dash to transom,
C = Gunwale to centerline of cable connection at centered tiller.
For Tilt Tube Mounting, add A, B & C + 6”, round up to next even
For Transom/Splashwell/Stringer Support Mounting, add A, B & C,
then subtract 6” and round up to next even foot. Order that length cable.
For Rack Steering Cable
Measure Existing Cable as follows:
Measure plastic cable jacket (casing, dimension “Y”) in inches, add
30”, and round up to next even foot. Order that length cable.