Tie Down Trailer Hubs

Call toll free - (877) 379-2248

Trailer Hub Kits

All kits include: bearings, seals, dust cap, cotter key, and lug nuts. Bearings and hub cavity 100% pre-greased. Grease seal and bearings are pre-assembled.

Sold each. Two kits required per axel.

Part No.

Description (Click to view & order)

Price

tie81060

tie81080

tie81085

tie81090

HUB INSTALLATION.

1. Remove wheel from hub.
2. Remove hub dust cap, cotter key, spindle nut and washer.
3. Remove old hub from spindle
4. Assemble new hub. Pack bearings as shown. If not already pre-assembled or pre-greased.
5. Mount wheel.
6. Tighten the spindle nut with a 1/2 inch wrench to approximately 40 ft. lbs. Turn wheel in both directions to be sure wheel turns freely.
7. Turn back spindle nut 1/6 to 1/4 turn to the nearest locking hole. Wheel should turn smoothly with no end play or wobble.
8. Line up cotter key with nearest locking hole and spread key.
9. Install dust cap.

Pyacht.com
Performance Yacht Systems
919 Bay Ridge Road
Annapolis, MD 21403

Toll free: 1-877-379-2248
Local: (410) 267-8681


	Join Email List