- If you want a backstay model, determine if you want it fore or aft of the
backstay. You might make this decision based on whether you have room on the
deck to mount the tube. If you mount the base plate horizontally, it is
2" fore and aft and 4" port and starboard. Or, you can mount the
base plate vertically.
- If you want a backstay model and you have less then 30" between the
leech of your mainsail and the backstay, you need the aft facing radar
leveling system. See models AA and AF.
- If you want a backstay model and you have more than 30" between the
leech of your mainsail and the backstay, you can order the forward facing
radar leveling system. See models FA and FF.
- If you have a split backstay, when ordering indicate whether you want the
radar leveling system on the port or starboard side. Also, please include
angle of the split from the vertical.
Specifications
| The
Waltz RLS Specifications |
Radomes
less than 18"
(mast or post mounts) |
Radomes
less than 18"
(backstay mounts) |
Radomes
greater than 18"
(mast or post mounts) |
Radomes
greater than 18"
(backstay mounts) |
| Platform
Weight |
6
lbs. |
6
lbs. |
7
lbs. |
7
lbs. |
| Height
of swing Arm |
16" |
16" |
16" |
16" |
| Platform
Dimensions |
8"x8" |
8"x8" |
8"x8" |
8"x8" |
| Backstay
Tube Diameter |
N/A |
1
¼ |
N/A |
1
¼ |
|
