Xantrex MS2000

Call toll free - (877) 379-2248

MS2000 Sine Wave Inverter/Charger

The MS2000 is an ideal solution for your Marine power requirements. It delivers up to 2000 watts of sine wave output from your battery bank. This allows you to power simultaneous applications including microwaves, entertainment systems, computers and power tools without adding distortion or interference. Its 100 amp, power factor corrected charger ensures that your batteries are recharged quickly, using significantly less AC input current to produce the same high output charge current. Designed for easy installation and enhanced reliability, the MS2000 comes with a large AC wiring box, side-mounted DC connections and a built-in 30 amp transfer switch that automatically transfers between inverter power and incoming AC power.

Part No.

Description (Click to view & order)

Price

xan8092010

xan8090910

xan8090915

xan8090917

Product Features

2000-watt sine wave inverter (5000-watt surge)
100 A power factor corrected multistage charger
Xanbus network enabled (compatible with NMEA network protocol)
Advanced diagnostics and field upgradeable software
Full power output at 122ºF (50ºC)
Built-in Echo-charge charges auxiliary or starter batteries
Automatically transfers between inverter power incoming AC power
Power sharing reduces charging current to prevent tripping of AC input breaker
Two year warranty

Protection Features

Battery over voltage and under voltage protection
Over temperature protection
Automatic overload protection
Short circuit protection

Accessories

System Control Panel
Automatic Generator Start

Specifications

Electrical Specifications

Output power (continuous)

2000 watts

Surge rating (5 second)

5000 watts (42 A)

Output voltage

120VAC

Output waveform

Sine wave<3% THD

Frequency (Nominal +/- 0.04% crystal controlled)

60 Hz

Efficiency (full load)

>85%

Peak efficiency

>89%

No load power draw (search mode)

<14.4 watts

AC transfer switch

30 A

Transfer time

20 ms (typical)

Electrical Specifications-Charger

Output current

100 ADC

Battery voltage (nominal)

12 VDC

Battery voltage range

10.0-15.5 VDC

Charge Control

3 stage with manual equalize

Charge temperature compensation

Remote battery sensor (included)

Efficiency

85% (typical)

AC input power factor

0.95

Input current (for 100A charging)

15 A RMS (nominal)

AC input voltage

120 VAC nominal

AC input voltage range

90 - 135 VAC

Compatible battery types

Wet/Gel/AGM

Echo charge output current

Single, 10A

General Specifications

Operating temperature Range

-4°F - 122°F (-20°C - 50°C)

Storage temperature

-40°F - 122°F (-40°C - 50°C)

Dimensions (H x W x D)

7.5 x 13.25 x 16" (190 x 336 x 406 mm)

Weight

68.0 lb

(30.9 kg)

Warranty

Two years

Part Number

809-2010

Accessories

System Control Panel

809-0910

Automatic Generator Start

809-0915

Network Connector

809-0903

Network Cable 3’

809-0935

Network Cable 5’

809-0936

Network Cable 7’

809-0937

Network Cable 10’

809-0938

Network Cable 14’

809-0939

Network Cable 25’

809-0940

Network Cable 50’

809-0941

Network Cable 75’

809-0942

Regulatory Approvals

CSA/NRTL, ABYC, FCC

Pyacht.com
Performance Yacht Systems
919 Bay Ridge Road
Annapolis, MD 21403

Toll free: 1-877-379-2248
Local: (410) 267-8681

Join our Email List
Enter your email address in the box below and click submit to receive bi-weekly product updates and special offers.